BUY Your #babydragon

BabyDragon comp chassis spec

  • Carbon Chassis
  • Portal or Straight axles
  • You need a forward motor mount plate (stock CR18P or SCX24 Furitek) for best results
  • 12° angled skid
  • RCMCCA class 2 and class 3 legal
Buy Now

Product contains

  • Carbon fiber chassis rails
  • PLA+ 3D printed parts
  • SCX24 or CR18P skid
  • High Clearance sliders for your esc/battery
  • Front/rear body mount
  • 2 optional esc/receiver/battery tray
  • Does not contain hardware tools

Axial SCX24 and HobbyPlus CR18P ready

You can select your preferred skid version. The holes are drilled for SCX24 M1.4 screws, so you need to drill the required holes to 1.7mm.

BabyDragon Micro Performance Scale Chassis

BABYdragon spare and optional parts ( we will still upload in this week )

BabyDragon skid plate SCX24 nordic orangeBabyDragon skid plate SCX24 nordic orange
Black Carbon (PA12CF15 carbon nylon)
Light Blue
Nordic Orange
Peak Green

BabyDragon Chassis parts

BabyDragon skid plate SCX24/CR18P/TRX4M

4,99 €
INJORA SCX24 33% Underdrive Diff Gears
Out of stock

BabyDragon Chassis parts

INJORA SCX24 33% Underdrive Diff Gears

10,99 €
INJORA SCX24 33% Overdrive Diff Gears
Out of stock

BabyDragon Chassis parts

INJORA SCX24 33% Overdrive Diff Gears

10,99 €
INJORA Stainless Steel Drive Shafts (Gladiator)INJORA Stainless Steel Drive Shafts (Gladiator)
Out of stock

BabyDragon Chassis parts

INJORA Stainless Steel Drive Shafts (Gladiator)

17,99 €
Placeholder
Black
Light Blue
Nordic Orange
Peak Green

BabyDragon Chassis parts

BabyDragon body mount and esc/battery tray

4,99 €
BabyDragon sliders
Black
Light Blue
Nordic Orange
Peak Green

BabyDragon Chassis parts

BabyDragon sliders

4,99 €

SCX24 SETUP

For best performance and geometry results, use the gladiator or deadbolt front links/driveshaft, and gladiator rear links/driveshaft.

Check out our Team Driver, Tamas build guide for his BabyDragon setup.

Driveshaft length:
Deadbolt, B17: Front: 32.5-40mm
C10, JLU, Bronco, Gladiator: Front: 40-52mm
Gladiator: Rear: 65-95mm

Links length (eye to eye):
Deadbolt, B17: Front Upper: 29.5mm, Front Lower: 41mm
C10, JLU, Bronco, Gladiator: Front Upper: 39mm, Front Lower: 50mm
Gladiator: Rear Upper: 70mm, Rear Lower: 78mm

Overdrive/Underdrive: I’m using stock gears in front (2/16T) and 33% underdrive in rear (1/12T).

HOBBYPLUS CR18P SETUP

The holes are drilled for scx24 M1.4 screws, so you need to drill the required holes to 1.7mm. You can use the stock links/drive shaft, but for better performance you need to create your own links. You can use the SCX24 driveshafts too, I recommend the size below.
We have 2 skid options, for 1 gear and for 2 gear transmissions.

Check out our Team Driver, Tamas daughters build guide for her CR18P based BabyDragon setup.

Driveshaft length:
Front: 40-52mm (SCX24 C10 front)
Rear: 60-90mm (SCX24 Deadbolt rear)

Links length (eye to eye):
Front Upper: 39mm

Front Lower: 49mm
Rear Upper: 64mm

Rear Lower: 76mm

Buy your BabyDragon micro scale chassis Now